Question: Can I use cooking oil for bearings?

If you’re in a pinch, there are some skateboard bearing lube alternatives around the house that you can try such a motor oil or even cooking oil to lubricate your bearings. … Solvents will eat away at the plastics inside the bearing, shortening the lifetime of your bearings.

Can you use cooking oil to lubricate bearings?

Grease up the bearings

Apply just 2 to 3 drops of oil per bearing. … Try not to grease up your bearings using thick oils. Stay away from lubricants such as vegetable oil, olive oil or car oil.

What kind of oil can I use for skateboard bearings?

The Best Lubricants for Skateboard Bearings

  • Bones Speed Cream Skate Bearing Lubricant.
  • Liberty Oil Synthetic Lubricant.
  • Ardent 0270-A Reel Bearing Lube.
  • Tri-Flow Superior Lubricant.
  • Oust Bearings Speed Clean Kit.
  • Bones Skate Bearings Cleaning Unit.
  • 3-IN-ONE Multipurpose Oil.
  • SONIC Citrus Skate Bearing Cleaner.

Can I put oil on my bearings?

Oils are the preferred lubricant in open bearing designs or when low torque or high speeds are the priority during bearing operation. “This is due to the relatively lower viscosities as compared to greases. Oil lubrication allows for more efficient movement of the ball through the lubricant, as compared to greases.”

IT\'S FUN:  Is cooking in a smoker healthy?

Can you use baby oil to lubricate bearings?

So what I did is I took the bearings out put some baby oil in a Syringe, put it in the bearings spin them a bit and it works like any other lubricant it worked pretty well for me so if you have a walmart board or something it sure works better than wd40.

Can you use Vaseline on bearings?

“Petroleum jelly, Vaseline, is one of the most benign substances available. It can be used without fear on the thrust bearings. It is a very chemically stable, alkaline hydrocarbon similar to paraffin wax. It is non-polar, so it is extremely nonreactive.

Is it OK to use WD40 on skateboard bearings?

It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. … It doesn’t take much, and the excess will just spin out when you replace your shields, pop your bearings back in your wheels and start shredding. Skate safe and enjoy your new-found speed.”

Is White Lithium Grease good for bearings?

Did you know a spray of WD-40 Specialist White Lithium Grease is a great lithium lubricant for bearings? It reduces friction on bearings and helps keep them protected from rust as well. … Because it’s a superior water and heat-resistant, high pressure grease, White Lithium Grease is great for cars and tools as well.